Installation & setup
Connect Android or iPhone to Windows or macOS
Complete the first USB pairing, resolve Android or iPhone authorization prompts, and confirm the mobile device is ready.
First-time USB pairing
- 01
Open both apps
Start AlterGPS on Windows or macOS, unlock the phone, and open the Android or iPhone companion used during setup.
- 02
Connect a data cable
Connect directly to a USB port on the computer. Remove unnecessary hubs, docks, and extension cables during the first setup.
- 03
Complete the platform-specific prompt
On Android, choose File transfer or the requested USB mode and approve USB debugging when shown. On iOS, unlock the phone and tap Trust with the passcode; approve Developer Mode when the setup guide requests it.
- 04
Approve device access
Approve the Android USB debugging prompt or the iOS trust prompt. Select an always-allow option only when you recognize the computer.
- 05
Wait for the desktop device card
Return to AlterGPS on the desktop and wait for the phone model and connection status to appear. Do not unplug while pairing is in progress.
What a successful connection looks like
| Checkpoint | Expected result | If it does not happen |
|---|---|---|
| Desktop detection | The Android or iPhone model is listed as a connected or available device. | Reconnect the cable and review the platform-specific driver or device-support check. |
| Mobile authorization | The phone shows an approved USB debugging or trust prompt. | On Android, reset the USB authorization; on iOS, reselect Trust This Computer. |
| App state | Both AlterGPS apps remain open without an error banner. | Restart both apps and keep the phone unlocked during pairing. |
| Location test | A nearby search result can be applied once. | Stop before testing routes and follow the troubleshooting checks. |
Keep the connection stable
- Use the same USB port and cable that worked during setup when diagnosing later failures.
- Do not move an Android phone into a restricted work profile or clone the mobile app.
- Protect the desktop app with its power settings so it does not sleep during an active route.
- Disconnect AlterGPS before removing Android developer settings, disabling iOS Developer Mode, or uninstalling the companion.
- Re-pair after replacing the Windows or macOS computer or changing the Android phone or iPhone.
Remove an old phone
If a previous Android phone or iPhone will no longer be used, stop any active movement first, disconnect it from the desktop app, and remove or forget it through the device controls in AlterGPS. Then use the uninstall guide to reverse the settings on that phone.
繼續閱讀
Install AlterGPS on Android
Install the APK, configure Android permissions, and prepare the phone for a reliable desktop connection.
Set up AlterGPS on iPhone
Prepare an iPhone, run the desktop-assisted setup, handle device trust and Developer Mode, and verify the connection.
Set up cable-free control
Use AlterGPS without leaving the USB cable connected after completing the initial trusted pairing.
Troubleshooting connections and routes
Work through common Windows or macOS detection, Android or iPhone permission, wireless, and playback problems.
還需要協助?
請先依疑難排解指南逐項檢查。若問題仍存在,聯絡 AlterGPS 時請附上版本、裝置型號與完整錯誤訊息。