Installation & setup

Set up cable-free control

Use AlterGPS without leaving the USB cable connected after completing the initial trusted pairing.

6 min更新 November 18, 2026Windows · macOS · Android · iPhone

Before switching to wireless

  • Complete the USB setup and successfully change location at least once.
  • Keep the Windows or macOS desktop app signed in and running on the same computer used for setup.
  • Use a trusted home or private network; avoid guest networks, hotel Wi-Fi, and captive portals.
  • Disable phone battery restrictions that stop the Android or iPhone companion when the display is off.
  • Make sure your plan or current release includes the wireless workflow you intend to use.

Enable wireless mode

  1. 01

    Confirm the cable connection

    Open AlterGPS on the desktop and phone, then verify that the Android or iPhone device is connected over USB.

  2. 02

    Turn on wireless control

    Use the wireless or cable-free option in the desktop device controls or mobile companion, following the prompt shown by your version.

  3. 03

    Wait for pairing to finish

    Allow the apps to exchange connection details. Keep both screens open and leave the cable connected until the desktop status changes to wireless or ready.

  4. 04

    Remove the cable and test

    Disconnect USB, wait a few seconds, then apply a single nearby location. A route test should wait until the wireless status remains stable.

Run wireless sessions reliably

  • Keep the Windows or macOS computer awake and the desktop app open while movement is active.
  • Keep the mobile app allowed to run in the background and exempt from aggressive battery saving where the phone platform permits it.
  • Reconnect USB after changing Wi-Fi networks or if the apps lose their trusted session.
  • Do not expose the desktop app or a local port directly to the public internet.
  • Stop playback before moving the computer between networks.

Return to USB

If wireless control becomes unreliable, reconnect the USB cable and wait for the device status to stabilize. Using the known-good cable to diagnose the problem separates a connection issue from a route or permission issue.

関連ガイド

まだ解決しませんか?

まずトラブルシューティングを確認してください。解決しない場合は、アプリのバージョン、端末名、表示されたエラーを添えてください。

トラブルシューティングを見る